Original blackout blind kit with VELCRO® brand hook fastener - Extra Large sizes

Complete darkness is easily achieved by ensuring that there are no gaps around the window where light can enter, so easyblinds’ Original Blackout Blinds withVELCRO® brand hook fastener tape attach directly to the window frame and sit behind any existing curtains or blinds.  This means there is no need to remove or change anything already in place.

There is no sewing involved, no drills, screws or frames, and no other fittings are required

EACH KIT INCLUDES:

·         blackout material

·         self-adhesive VELCRO® brand hook fastener tape (for use on the window frame)

·         wide loop fastener tape (for use on the blackout material)

·         instructions

All that is required in addition is a measuring tape and scissors.

Easy to use:

1. Measure the window to be covered, including the frame.
2. Cut the blackout material to the shape and size required (adding 4cm to each side to make an overlap).
3. Attach the self-adhesive VELCRO® brand hook fastener tape around the window frame.
4. Attach the self-adhesive wide loop tape around the blackout material.
5. Press your easyblind™ in to place against the window frame when required.

Specification:

1. Premium 3-coated blackout material. This blackout material has undergone rigorous testing to meet high demands of performance and aesthetic appeal.
2. This blackout fabric is 52% polyester and 48% cotton with acrylic back coating.
3. The adhesive on our VELCRO® brand hook fastener tape is suitable for use with uPVC windows and is durable for frequent use.
4. Please note that our adhesive, although not permanent, is quite strong and could pull paint or varnish away from wooden window frames, particularly where the finish is not sound.  For use on wooden window frames, we recommend using Frame Fasteners here.

The easyblinds’ Original Blackout Blind kits are available in a range of sizes, simply cut to fit.

Width and drop Please note that either side can be used as the width or drop, ie every kit can be used either way around.

Difference between 'easyblackout' and 'original' blackout kits with VELCRO® brand hook fastener tape? With both types, you stick the hook fastener tape around the window frame. With the 'original' blackout kit, you also stick loop fastener tape to the blackout material, but with easyblackout there is no need to do this as this material will attach directly to the hook fastener tape on the window frame.  This original type is a lighter material and more compact if rolled or folded between uses. In terms of blackout they are the same.  Both can be used with our magnetic tiebacks.

VELCRO® is a registered trademark of Velcro BVBA, used with permission.